Showing posts with label PDA. Show all posts
Showing posts with label PDA. Show all posts
Wednesday, March 22, 2006
Thursday, March 16, 2006
tummy.com LG-5350 CDMA Phone with Linux (USB)
tummy.com LG-5350 CDMA Phone with Linux (USB): "So, in this case the phone is showing up on '/dev/usb/ttyUSB0' on my KRUD/RedHat 9 system. At this point you should be able to open up a terminal emulator (such as 'minicom' or 'kermit'), and set it to use '/dev/usb/ttyUSB0' at 230400, and if you type 'at' followed by the 'enter' key, the phone should respond 'OK'."
How to repair broken iPAQ after unsuccessful ROM upgrade - Resco Forums
How to repair broken iPAQ after unsuccessful ROM upgrade - Resco Forums: "How to put the iPAQ hx4700 into Bootloader mode
Press the POWER + iTASK + CONTACTS buttons at the same time and hold all of them. Then shortly press the Reset button on the bottom and release all of them. The screen with HP logo in the middle will appear having the bootloader version at the bottom and the text “Serial” on the top. If you will connect the device to USB, the text “Serial” will change to “USB”."
Press the POWER + iTASK + CONTACTS buttons at the same time and hold all of them. Then shortly press the Reset button on the bottom and release all of them. The screen with HP logo in the middle will appear having the bootloader version at the bottom and the text “Serial” on the top. If you will connect the device to USB, the text “Serial” will change to “USB”."
My HP iPAQ 5450 - it does almost everything! (Gadgets)
My HP iPAQ 5450 - it does almost everything! (Gadgets): "How to perform a hard reset on the iPAQ 5450
Hold down two outer buttons (calendar & today button )and press soft reset in for at least 10 secs. The screen will blink and the iPAQ will be reset with almost no data saved."
Hold down two outer buttons (calendar & today button )and press soft reset in for at least 10 secs. The screen will blink and the iPAQ will be reset with almost no data saved."
Wednesday, March 15, 2006
SourceForge.net: synce-devel
SourceForge.net: synce-devel: "A better way to handle iPAQ auto-connection"
The udev program in my PC requires a key of BUS. So my udev rules file reads:
BUS="usb", DRIVER="ipaq", NAME="ipaq", SYMLINK="tts/USB%n", GROUP="tty", MODE="0600"
The udev program in my PC requires a key of BUS. So my udev rules file reads:
BUS="usb", DRIVER="ipaq", NAME="ipaq", SYMLINK="tts/USB%n", GROUP="tty", MODE="0600"
SynCE
SynCE: "Special information for HP iPAQ 5550 owners
Also applies to the MiTAC Mio 168, also known as Bluemedia PDA 255 and Yakumo Delta GPS 300!
The HP iPAQ 5550 and some other newer devices, probably including the HP iPAQ 4150, do not work with any currently existing version of the ipaq module.
The problem is that these devices have more than one pair of USB endpoints. (Compare the output from the usbview program for iPAQ 3970 and iPAQ 5550.)
To fix this, apply ipaq-0.6-olivier.patch (courtesy of Olivier Dugeon), compile the kernel module, and insert it like this:
modprobe ipaq ttyUSB=1
You could also put a line in your /etc/modules.conf or /etc/modprobe.conf file for this:
option ipaq ttyUSB=1
Then configure SynCE to use ttyUSB1 instead of ttyUSB0."
Instead of patching and rebuild the Debian kernel package, I just modified the module ipaq.ko in binary.
The origial module:
0000AAF0 FF 00 01 01 01 00 00 00 00 00 00 00 00 00 00 00
Hacked:
0000AAF0 FF 00 02 02 02 00 00 00 00 00 00 00 00 00 00 00
Also applies to the MiTAC Mio 168, also known as Bluemedia PDA 255 and Yakumo Delta GPS 300!
The HP iPAQ 5550 and some other newer devices, probably including the HP iPAQ 4150, do not work with any currently existing version of the ipaq module.
The problem is that these devices have more than one pair of USB endpoints. (Compare the output from the usbview program for iPAQ 3970 and iPAQ 5550.)
To fix this, apply ipaq-0.6-olivier.patch (courtesy of Olivier Dugeon), compile the kernel module, and insert it like this:
modprobe ipaq ttyUSB=1
You could also put a line in your /etc/modules.conf or /etc/modprobe.conf file for this:
option ipaq ttyUSB=1
Then configure SynCE to use ttyUSB1 instead of ttyUSB0."
Instead of patching and rebuild the Debian kernel package, I just modified the module ipaq.ko in binary.
The origial module:
0000AAF0 FF 00 01 01 01 00 00 00 00 00 00 00 00 00 00 00
Hacked:
0000AAF0 FF 00 02 02 02 00 00 00 00 00 00 00 00 00 00 00
Friday, March 10, 2006
Friday, March 03, 2006
Wednesday, February 22, 2006
Subscribe to:
Posts (Atom)